Material identity
State whether unfilled PTFE, a filled grade or a named supplier product is required. If the drawing names a brand, specify whether alternatives are permitted. Do not assume that all products sold under a broader brand family share one material specification.
Machining and dimensional control
Ensinger notes that the softness of PTFE presents machining challenges. Features must be assessed with the material, workholding and inspection approach in view. A generic machining tolerance or metal-part inspection routine should not be copied directly into a PTFE commitment.
Application interfaces
For seals, liners or insulating features, describe the mating surfaces and the operating conditions relevant to the design. A component material name alone does not prove the performance of a seal, a pressure assembly or an electrical system.
Inspection and handling
Define critical features, permitted edge condition, surface requirements and the requested material records. Agree the acceptance conditions for the supplied part. Avoid interpreting a white part in a photograph as proof of a particular PTFE grade.
Project questions
Does an RFQ need to distinguish unfilled from filled PTFE?
Yes. State the exact grade, filler or named supplier product and whether substitutions are allowed. Give the operating interface and material documentation needed for the design. A white part in a photograph does not verify its composition.
What makes PTFE component inspection different?
Specify the dimensions and surfaces that affect fit, along with the support and measurement conditions to be agreed during review. PTFE softness can affect workholding and measurement, so a generic metal-part inspection method or blanket tolerance should not be assumed suitable.
Technical references
Material references inform engineering discussion; they do not certify company capability.

