RALLIVEX PrecisionQuoteSend Enquiry / Request a Quote

Make the contact requirements explicit.

Connector contacts need a coordinated specification for base material, geometry and plating. Include the mating interface and assembly process so the finished contact can be reviewed as a functional component.

Illustrative turned brass connector contacts concept
Illustrative part concept

Define the mating interface

Specify pin and socket dimensions, entry features, contact regions and relevant drawing tolerances. If insertion or retention force is an acceptance requirement, define the mating configuration and test conditions. A tight dimension alone does not establish zero mating failures.

Material and manufacturing features

State the alloy and condition, together with any permitted alternatives. Include bores, slots, flats and attachment features in the model. Do not infer a particular machine type or size limit from a generic product image.

Plating specification

Describe the required coating system, thickness requirements, areas to mask and dimensions after plating. Identify any supporting documents required for the application. Gold-coloured appearance does not establish a gold plating specification or a compliance result.

Qualification and recurring supply

For samples, explain which fit or performance tests they will support. For batches, include revision control, identification and inspection-document requirements. Device-level signal integrity, current rating and service life require the relevant design and validation evidence.

Project questions

Can a material or plating choice guarantee connector performance?

Not by itself. Performance depends on the complete contact design, mating parts, environment and verification conditions.

What should the quotation package include?

Provide the contact drawing, mating details, material, plating specification, quantity, inspection requirements and any sample or qualification plan.

Details to include in your RFQ

Project preparation checklist — not a capability specification
TopicInformation to prepare
Contact geometryPin, socket and mating dimensions
MaterialBase material and permitted substitutions
PlatingSpecification, thickness requirements and masked areas

On narrow screens, scroll the table horizontally.

Project planning

Quote the contact as a mating system

Pins and sockets need their material, geometry and treatment described against the intended mating component.

01

Interface drawing

Provide both sides of the mating pair where possible, including entry geometry, fit and attachment features. Distinguish drawing dimensions from force or cycle-life tests.

02

Material and plating

Specify base alloy, condition, coating system, treated areas and any masking. Appearance alone does not verify plating composition or thickness.

03

Qualification plan

Describe sample quantity, inspection records and the application tests the design owner will run. Confirm how approved revisions will be controlled for repeat supply.

Project enquiry

Discuss your manufacturing project

Describe your requirements. Attach a drawing if available.

Send a project enquiry or request a quote

Describe your project or quality question below. Drawings are optional; if you have them, accepted formats are STEP, STP, IGES, DXF, DWG, PDF and ZIP. Your request is received only after a confirmation reference appears. For questions, email sales@rallivex.com or contact us on WhatsApp: +86 137 3607 8178.

You can submit without a drawing. If attaching files: STEP, STP, IGES, DXF, DWG, PDF or ZIP; up to 10 files, 20 MB each and 25 MB total. Files are sent only when you submit.