RALLIVEX PrecisionQuoteSend Enquiry / Request a Quote

Communicate the electrical and thermal requirements.

Copper components should be specified by grade and by the electrical, thermal or mechanical requirement they must meet. A copper material label or surface colour is not sufficient to identify an alloy or its condition.

Machined copper component from Rally Precision
Example image from a former Rally website. Confirm the grade and project specification in the drawing.

Select the exact specification

Include the copper grade, stock form and any material documentation required. Do not silently substitute a more easily machined copper alloy for the specified material. Design approval is needed when a substitution could affect the application.

Contact and mating surfaces

Show critical contact faces, joint interfaces, holes and slots. Include surface and dimensional requirements that affect assembly. The machining route and finish need to preserve the drawing requirements of the finished part.

Surface treatment and handling

Describe required coating, protected areas and acceptable appearance. If oxidation or packaging condition matters to the assembly process, state the acceptance requirement explicitly. A previous product photograph does not define the condition of the new order.

Verify the intended performance

Specify any material or product tests needed by the design. Machining a component to a drawing does not itself verify a complete electrical or thermal system. Agree which checks are included in the manufacturing scope.

Project questions

What information matters for a machined copper contact?

Give the copper grade and stock form, mating/contact faces, connection method, coating and any protected surfaces. Identify the material record and final-part checks required. Electrical performance of the full assembly needs its own design validation; machining to shape alone does not prove it.

Can a different copper alloy be substituted without review?

No. An alternative alloy can change conductivity, strength, corrosion behavior or processing. List permitted alternatives in the drawing or ask the design owner to approve a proposed change before quoting or manufacturing. Availability of the specified grade is checked for the actual project.

Details to include in your RFQ

Project preparation checklist — not a capability specification
TopicInformation to prepare
SpecificationMaterial grade and condition, geometry and current revision
RequirementsQuantity, finish and critical dimensions
DocumentationRequested inspection and material documents

On narrow screens, scroll the table horizontally.

Project planning

Treat copper as a functional material choice

Conductivity, thermal contact and surface condition may be more important than the outside silhouette.

01

Material designation

Specify grade, condition and any required material record. Do not assume that all copper products have identical properties or availability.

02

Contact interfaces

Mark electrical or thermal contact faces and the flatness, cleanliness or finish requirements assigned by the design.

03

Handling and protection

Describe any packaging or surface-protection needs after machining. Agree how oxidation-sensitive or cosmetic surfaces will be accepted at delivery.

Project enquiry

Discuss your manufacturing project

Describe your requirements. Attach a drawing if available.

Send a project enquiry or request a quote

Describe your project or quality question below. Drawings are optional; if you have them, accepted formats are STEP, STP, IGES, DXF, DWG, PDF and ZIP. Your request is received only after a confirmation reference appears. For questions, email sales@rallivex.com or contact us on WhatsApp: +86 137 3607 8178.

You can submit without a drawing. If attaching files: STEP, STP, IGES, DXF, DWG, PDF or ZIP; up to 10 files, 20 MB each and 25 MB total. Files are sent only when you submit.