RALLIVEX PrecisionQuoteSend Enquiry / Request a Quote

Start with the environment and function.

Plastic machining begins with the exact resin specification and the conditions in which the part will be used. Polymer family, grade, fillers and stock condition can affect the appropriate manufacturing and inspection approach.

Plastic part in a CNC machining operation from Rally Precision
Example image from a former Rally website. Confirm the grade and project specification in the drawing.

Choose from application requirements

Describe the temperature range, chemical contact, loading, wear and electrical requirements relevant to the design. These are selection inputs, not evidence that one material meets every requirement. Use the grade-specific material data and appropriate application validation.

Consider dimensional behaviour

Workholding, heat and the material response need to be considered when defining machined features. Ensinger distinguishes the machining behaviour of different engineering plastics; one tolerance claim should not be applied to every polymer and shape.

Identify resin and substitutions

State whether the drawing requires a particular manufacturer grade or permits equivalents. Colour alone does not identify the resin. Filled and unfilled materials should not be treated as interchangeable without design approval.

Define inspection conditions

Explain when and how critical dimensions should be assessed, especially where application or conditioning requirements matter. Include the needed material records and any cleanliness or handling instructions. A generic plastic datasheet is not a completed application approval.

Project questions

How should I choose a plastic for a machined component?

Start with the operating temperature, load, chemical exposure, wear and electrical requirements, then name a grade supported by its supplier data. Distinguish filled from unfilled resin and say whether equivalent grades are permitted. Color by itself is not a material specification.

What should a plastic-part drawing say about inspection?

Identify the functional dimensions, the conditioning or measurement state if it matters, and the surfaces that must remain free of clamping marks. Different polymers respond differently to machining and handling; agree on a project-specific inspection plan instead of copying a metal-part tolerance claim.

Technical references

Material references inform engineering discussion; they do not certify company capability.

Details to include in your RFQ

Project preparation checklist — not a capability specification
TopicInformation to prepare
SpecificationMaterial grade and condition, geometry and current revision
RequirementsQuantity, finish and critical dimensions
DocumentationRequested inspection and material documents

On narrow screens, scroll the table horizontally.

Project planning

Define the polymer grade and environment

Engineering plastics require application-specific review rather than a metal-part drawing with a different material name.

01

Grade and form

Name the exact polymer grade, filler and stock form if relevant. State whether an equivalent material is allowed and who approves it.

02

Service conditions

Describe temperature, load, fluid exposure, friction or electrical conditions that the designer considers important. These inputs support material selection but do not replace product validation.

03

Measurement conditions

Identify critical dimensions, fit and inspection conditions. Flexible or moisture-sensitive materials may require a clearly agreed measurement approach.

Project enquiry

Discuss your manufacturing project

Describe your requirements. Attach a drawing if available.

Send a project enquiry or request a quote

Describe your project or quality question below. Drawings are optional; if you have them, accepted formats are STEP, STP, IGES, DXF, DWG, PDF and ZIP. Your request is received only after a confirmation reference appears. For questions, email sales@rallivex.com or contact us on WhatsApp: +86 137 3607 8178.

You can submit without a drawing. If attaching files: STEP, STP, IGES, DXF, DWG, PDF or ZIP; up to 10 files, 20 MB each and 25 MB total. Files are sent only when you submit.