RALLIVEX PrecisionQuoteSend Enquiry / Request a Quote

Connect the alloy to the application.

An aluminum enquiry should identify the alloy and temper, not only the material family. The old-site material content covers several alloy names; that history does not establish current stock or guaranteed supply.

Machined aluminum housing example from Rally Machining
Example image from a former Rally website. Confirm the grade and project specification in the drawing.

Alloy and condition

Record the full material specification, temper and required stock form. The same alloy name can appear in different conditions and products. Use the relevant supplier data and procurement specification rather than one unqualified property value.

Geometry and manufacturing

Include thin sections, deep pockets and assembly interfaces in the model. State which dimensions are critical after finishing. If an alternative alloy is allowed, have the design owner define the permitted substitution rather than accept an undocumented change.

Finish and appearance

Specify the finish, colour reference and visible faces. Appearance requirements and material selection should be considered together. A photo from a previous project does not guarantee the colour or appearance of a different alloy, batch or treatment.

Material records

Ask for the material identification or documentation needed by the project. Confirm the relevant batch and product form. A generic datasheet is useful design context, but it is not a material certificate for the delivered components.

Project questions

Which aluminum details belong in a machining RFQ?

Name the alloy, temper and required product form, then mark critical dimensions and whether they apply before or after finishing. If an alternative alloy or temper is acceptable, state who may approve it. A generic alloy datasheet cannot identify the batch used for the delivered parts.

What should I specify for visible anodized aluminum parts?

Provide the finish specification, color or approved sample, visible faces, masked areas and dimensions to be checked after treatment. Appearance can vary with the alloy, condition and process, so ask for project-specific sample approval rather than using a photograph as a color standard.

Technical references

Material references inform engineering discussion; they do not certify company capability.

Details to include in your RFQ

Project preparation checklist — not a capability specification
TopicInformation to prepare
SpecificationMaterial grade and condition, geometry and current revision
RequirementsQuantity, finish and critical dimensions
DocumentationRequested inspection and material documents

On narrow screens, scroll the table horizontally.

Project planning

Specify the aluminum, not just the family

Alloy, temper and stock form can affect the engineering and purchasing discussion.

01

Material callout

List the required alloy, temper, product form if constrained, and any approved alternative. Do not substitute one aluminum grade solely because both are commonly machined.

02

Interface requirements

Note loaded sections, threads, heat paths, cosmetic faces and mating features. Their priorities help determine which machining and finishing questions matter.

03

After-treatment dimensions

If anodizing or another finish is planned, identify masked regions and the dimensions controlled on the finished part. Agree appearance and inspection expectations separately.

Project enquiry

Discuss your manufacturing project

Describe your requirements. Attach a drawing if available.

Send a project enquiry or request a quote

Describe your project or quality question below. Drawings are optional; if you have them, accepted formats are STEP, STP, IGES, DXF, DWG, PDF and ZIP. Your request is received only after a confirmation reference appears. For questions, email sales@rallivex.com or contact us on WhatsApp: +86 137 3607 8178.

You can submit without a drawing. If attaching files: STEP, STP, IGES, DXF, DWG, PDF or ZIP; up to 10 files, 20 MB each and 25 MB total. Files are sent only when you submit.